The NJP-1200C automatic filling machine is 9 cm wider than similar products due to the innovative design of the factory, the enlarged indexing box structure, the use of 90 original bearings for the mold turntable, and the enlarged design of the measuring disk.
The filling speed is fast and the size difference is small. This machine integrates the powder capsule shell finishing, the capsule cap cover finishing, and the capsule set into one, which is compact and convenient.
The filling amount is basically uniform between the capsules, and the density of the medicinal powder in each part of each capsule is consistent to ensure that the effective ingredients of the capsules are exerted.
At the same time, it has many advantages such as high output, high efficiency, simple operation, convenient maintenance and low power consumption, and has the characteristics of uniform filling and full filling. It is a capsule filling equipment for pharmaceutical factories, health product factories, hospital preparations, outpatient departments, and research institutes.
NJP-1200C automatic filling machine is operated by touch panel, frequency conversion speed regulation, the machine has flexible movement, filling dose, novel structure, beautiful shape, convenient operation, can automatically complete the capsule positioning, separation, filling and other actions, reducing Labor intensity, improve production efficiency.
It is suitable for filling all kinds of capsules, whether it is domestic or imported. It is an economical and practical equipment for filling capsule medicines in the pharmaceutical industry.
(1) Cleaning frequency: ① After the end of each batch of production; ② After the end of each shift of continuous production; ③ Cleaning and disinfection before and after production; ④ Cleaning is required when changing varieties, specifications, and batch numbers; ,disinfect.
(2) Cleaning tools: clean non-spinning cloth, vacuum cleaner, brush, cleaning basin, etc.
(3) Cleaners and disinfectants: drinking water, purified water, 75% ethanol.
(4) Cleaning method: in the order of dismantling first, then washing, first inside and then outside, first zero and then whole:
1) Cleaning steps for producing the same variety: ① first use a vacuum cleaner and then a soft brush to clean the residual powder in the powder filling device module; ② remove the powder punch, metering plate, and powder hopper, take it to the cleaning room, and rinse with drinking water Once again, rinse with purified water and dry with a dry rag.
Wipe and disinfect with a rag dipped in 75% ethanol; ③The parts of the equipment that are in direct contact with the medicine should be wiped clean with purified water, then dried with a dry rag, and then wiped and disinfected with a rag dipped in 75% ethanol; 4. Glass protective cover and Scrub the surface of the equipment with purified water; ⑤ Clean up the site. After passing the inspection, hang a "cleaned" status mark; ⑥ Fill in the cleaning record.
2) Cleaning steps for changing varieties: In addition to the cleaning steps for producing the same variety, the following work should be done: ① Remove the capsule barrel and capsule funnel, take them to the cleaning room, rinse them with purified water, and then dry them with a dry rag , and then wipe and disinfect with a rag dipped in 75% ethanol; ② wipe the cam disc movable support with a rag, then scrub it with purified water, then dry it with a dry rag, and finally wipe it with a rag dipped in 75% ethanol for disinfection .
(5) Evaluation of cleaning effect: the appearance of the whole machine is smooth and clean. Wipe all parts of the equipment with a clean white rag that has no stains, stains, or traces of residue.
Contact Person: Ms. Wei
Tel: 86-15372434551
Fax: 86-571-88615836
