Up to 5 files, each 10M size is supported. OK
Hangzhou SED Pharmaceutical Machinery Co.,Ltd. 86-0571-88617715 info@sedpharma.com

News

Get a Quote
Home - News - Pay attention to three points for regular maintenance of automatic powder quantitative packaging machine

Pay attention to three points for regular maintenance of automatic powder quantitative packaging machine

July 26, 2022

At present, the commodities on the market are powder, granular, liquid and so on. According to the characteristics of powder products, we need to choose an automatic powder quantitative packaging machine. It plays an important role in our production and life. Automatic powder quantitative packaging machines are also widely used.

 

Therefore, after purchasing an automatic powder quantitative packaging machine, you should pay attention to this. Routine maintenance and maintenance, the following are some issues that you need to pay attention to when analyzing and maintaining:

 

latest company news about Pay attention to three points for regular maintenance of automatic powder quantitative packaging machine

Automatic powder quantitative packaging machine

 

(1) Lubrication: The gear must be regularly lubricated at the meshing point of its gear, the oil filling hole of the bearing with a seat and the oil filling hole of the moving parts. It is strictly forbidden to run the reducer without oil. When filling with lubricant, be careful not to place the tank on a rotating belt, which could damage it from slipping, falling, or premature aging.

 

(2) Maintenance: Before using the automatic powder quantitative packaging machine, please check the screws of all parts of the machine and do not loosen them. Otherwise, the normal rotation of the machine will be affected.

 

The electrical part should pay attention to waterproof, moisture-proof, anti-corrosion, and anti-rat to ensure the cleanliness of the electrical control box and terminals to prevent electrical failures. After closing, the two heat seals should remain open. Open position to prevent scalding of packaging material.

 

(3) Cleaning: After shutdown, the measurement part should be cleaned in time, and the heat-sealed body should be cleaned regularly to ensure that the sealing line of the packaged product is clear. For scattered materials, it should be cleaned in time to facilitate the cleaning of machine parts, so as to better prolong its service life. At the same time, dust in the electronic control box should be cleaned regularly to prevent short circuits or poor contacts and other electrical failures.

 

The powder product is easy to float due to its small size, and is equipped with an automatic powder quantitative packaging machine, which not only facilitates the packaging of the product, but also cleans people's working environment, so that people have a guarantee of safety and health at work.

 

In order to make the packaging The machine can run for a long time, we must pay attention to its daily maintenance to make it better for us. Production and living services.