The daily maintenance of packaging machinery and equipment must perform several processes. They are the cleaning, tightening, adjustment, lubrication and corrosion protection of equipment.
In the daily production process, machine maintenance personnel should strictly carry out maintenance work within the specified time in accordance with the maintenance manual and maintenance procedures of packaging machinery and equipment, reduce the wear speed of parts, eliminate hidden troubles, and expand the scope of services. the life of the machine.
Powder packaging machinery and equipment
Packaging machinery and equipment maintenance includes routine maintenance, regular maintenance and special maintenance. Regular maintenance can be divided into three categories: primary maintenance, secondary maintenance and tertiary maintenance. Special maintenance can be divided into two categories: quarterly maintenance and out-of-service maintenance. The following articles will describe specific procedures and preventive measures for the maintenance of packaging machinery and equipment.
Routine maintenance of packaging machinery and equipment focuses on cleaning, lubrication, inspection and tightening. Routine maintenance should be performed during and after machine operation.
Primary maintenance is carried out on the basis of regular maintenance. The key tasks are lubrication, tightening and inspection of related parts and cleaning.
Secondary maintenance focuses on inspection and adjustment. Check engine, clutch, transmission, transmission components, steering and brake components.
Level 3 maintenance focuses on detecting, adjusting, troubleshooting and balancing the wear and tear of each component. It is necessary to carry out diagnostic tests and status checks on the parts that affect the performance of the equipment and the parts with faulty symptoms, so as to complete the necessary replacement, adjustment and troubleshooting.
Seasonal maintenance refers to the inspection and repair of components such as power system (engine), conveying system (screw and belt conveyor), air pressure system (checking the lubrication and sealing of air compressors) and control system (checking and repairing). The installation of Ute mechanical and electrical control cabinet should be completed under the guidance of Ute after-sales engineer before the end of summer and winter each year).
Out of service maintenance refers to when the packaging machinery and equipment need to be stopped for a period of time due to seasonal factors (such as winter breaks), cleaning, beauty, support, moisture-proof, anti-corrosion and other work.
Contact Person: Ms. Wei