Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
We will call you back soon!
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
—— Fatih BÜYÜKEGEN
—— Hamid Doroudian
1. When the full-automatic capsule filling machine works normally for a long time, the parts and components in direct contact with the drug should be cleaned regularly. When the drug type needs to be changed or the shutdown time is long, it should be cleaned;
2. The transmission parts at the lower part of the automatic capsule filling machine should be cleaned of oil dirt frequently to make the observation of the operation more clear;
3. The filter of the vacuum system should be opened regularly to remove the blocked dirt;
4. The oil quantity of the main drive reducer and feed reducer shall be checked once a month, and the lubricating oil shall be replaced every half a year if it is insufficient;
5. The working surface of the roller of the cam of the automatic capsule filling machine shall be coated with grease every week;
6. The joint bearing of the lower connecting rod of the fully automatic capsule filling machine should be lubricated with oil every month;
7. All bearings shall be cleaned regularly or according to the operation conditions, and lubricating grease shall be added. The sealed bearings can be lubricated by dripping oil;
8. Check the tightness of the drive chain once a week and apply lubricating oil or grease;
9. Clean the equipment before and after using the automatic capsule filling machine.