company news about How to adjust the poor accuracy of the labeling machine

Labeling machine is a kind of equipment commonly used by many enterprises at present, but according to the experience accumulated for a long time, we found that when using the labeling machine, the problem of poor labeling accuracy often occurs, which will easily affect the beauty of labeling. At this time, we need to deal with it in time, so how to deal with it? Let's take a look

Generally speaking, there are three main reasons for the poor accuracy of the labeling machine: first, the product reason. There are two reasons for the product: label and product: a. The common problem of label is that the label spacing is not up to standard. Solution: select the label with the standard label spacing to label. B. The common problem of the product is that the product accuracy error is too large. The solution is to check and adjust the size accuracy of the product to ensure that the label is affixed to the fixed position of the product when labeling.

2、 Electrical reasons, including detection and power: a. The specific reasons for detection are: 1. The stop meter is inaccurate, and the solution is to reset the marking eyes, so that the labeling machine stops marking after the product is labeled; 2. The measuring object is inaccurate. Solution: adjust the measuring object electric eye and amplifier to accurately check the labeled product and accurately mark it. B. The common cause of power is abnormal transmission. Solution: according to the inspection, fasten the transmission parts to ensure the normal operation of Shenzhen labeling machine.

3、 Mechanical reasons can be divided into static and dynamic reasons: a. The static reason is reflected in the shaking of the head. Solution: according to the fastening of the head and the adjustment of the fixed seat, the head can be fixed, and then the shaking can be avoided. B. Specific dynamic reasons: 1. The product shakes in the transportation. Solution: according to reducing the guide clearance, the product shakes in the transportation can be avoided; 2. The marking is matched with the product speed. The solution is to adjust the traction frequency or transmission speed so that the product can be marked when it reaches the labeling position.