Home All Cases

How should the automatic labeling machine be debugged?

China Hangzhou SED Pharmaceutical Machinery Co.,Ltd. certification
China Hangzhou SED Pharmaceutical Machinery Co.,Ltd. certification
Customer Reviews
 I would like to thank you for all your efforts to choose the correct atomizer for our spray dryer,High speed drying. The surface area of Raw Material liquid increased a lot after atomization through nebulizer, 95%-98% of moisture will be evaporated in high temperature airflow in a flash, only needs seconds time.


I really don't know how to thank you, you are my angel, Thank you very much. Super Fine Pulverizing this one is faster than other same power machine and is easy to operate and repaired.

——  Hamid Doroudian 

I'm Online Chat Now

How should the automatic labeling machine be debugged?

April 19, 2021
Latest company case about How should the automatic labeling machine be debugged?

How should the automatic labeling machine be debugged? With the increase in product demand and the continuous reform of the mechanized management trend, labeling is now also equipped with professional equipment. However, such equipment must be operated in accordance with the process, which has a very important impact on whether employees understand the labeling machine.


So what methods do you need to master during the operation and debugging of the fully automatic labeling machine?

1. Loosen the fixing screws

Adjust the screws on the roll paper tray. First remove the plexiglass tray, and then adjust the area of ​​the rear tray so that the area of ​​the rear tray can meet the position of the paper tray and ensure that it is on the center line of the paper tape. Tighten the screws, install the paper tray and the plexiglass front tray, then fix the screws and turn the roll paper tray after fixing it to check whether its flexibility is good. If you find that the paper tray is not flexible, you can also do it Adjust accordingly to make it more flexible.

2. Labeling paper tape

Before we wear the labeling tape, we should check the rollers of the labeling tape to check whether all the rollers are flexible enough. If there are insufficiently flexible rollers, they must be adjusted to be flexible before proceeding. operating.

In addition, the threading method of the automatic labeling machine should also pay special attention to allowing the sticker to be operated effectively through the sensor to ensure the normal operation of the equipment.

3. Trial paste operation

After adjusting the equipment, we need to test paste and debug. You can put the bottle on the conveyor belt first, and then adjust the bottle bar, and then adjust the distance and other steps, you can press the motor switch.

When the automatic labeling machine is started, we can first use a few bottles for labeling experiments. If the labeling effect can meet our requirements, then we can let the product system carry out the labeling process.

The above is about how to debug the automatic labeling machine? I hope it can help you to better understand the working principle and precautions of the labeling machine, so that everyone can use it more conveniently and efficiently.

Contact Details
Hangzhou SED Pharmaceutical Machinery Co.,Ltd.

Contact Person: Ms. Wei

Tel: 86-15372434551

Fax: 86-571-88615836

Send your inquiry directly to us (0 / 3000)