In order to ensure the normal and smooth use of the capsule filling machine, we should do a good job of equipment adjustment before use. The staff of Shandong capsule filling machine summarized the following points, hoping to help you.
1. Turn on the power.
2. Check that all safety settings are properly equipped and adjusted.
3. Without capsules and powder, use the handwheel to rotate 1-3 times in the direction of machine operation. When it is normal, put the capsule and powder into the capsule bucket respectively, and the height of the powder filled into the powder bucket shall be 60mm lower than the high level of the container. At the same time, there should be more than half of the powder in the metering and distribution room.
4. Adjust the preset insertion depth of the filling rod into the metering disc.
5. After all adjustments are made, press the main engine to jog. After the jog is normal, the switch can be started for full automatic operation.
6. The speed adjustment is carried out when the main motor is running.
Contact Person: Ms. Wei
Tel: 86-15372434551
Fax: 86-571-88615836
