company news about Understand these conditions of the automatic quantitative powder packaging machine, and then start the work

Understand these conditions of the automatic quantitative powder packaging machine, and then start the work
The automatic quantitative powder packaging machine adopts microcomputer control and hybrid stepping motor drive technology, which is stable and reliable in work, with high repeatability and low noise. It can work in constant volume or quantitative mode.

The blanking is controlled by a photoelectric switch and is not affected by the environment. The part in contact with the material is made of stainless steel, which has strong corrosion resistance and does not pollute the material. The packaging needs of different materials and different specifications can be realized only by replacing the metering screw parts, and the whole process takes less than 10 minutes.

The machine has functions such as keyboard setting, automatic quantitative filling, weighing feedback, automatic error correction, out-of-tolerance alarm, material level control, automatic material cleaning, electronic scale overload protection, and counting.

It is suitable for quantitative packaging of powdery materials and small granular materials, such as pesticides, veterinary drugs, feed, flour, additives, condiments and other industries.

The control part of the automatic quantitative powder packaging machine is mainly composed of main control board, sensor, electrical control board, driving power supply, operating keyboard, photoelectric switch and material level switch. The main control board is the control core. The sensor converts the weight signal into an electrical signal and sends it to the main control board. The drive power is used to drive the stepper motor.

The keyboard is used to set, modify and operate various parameters of the whole machine. In order to control the material level in the hopper, the electrical control board is used to control the power supply, stirring motor and automatic feeding motor of the whole machine.

Before using the automatic quantitative powder packaging machine, please pay attention to the following items, it will help you use and maintain the machine correctly, ensure the safety of human and machine, and give full play to its performance, reduce failures and prolong life:

1. Do not start the machine until you understand the correct operation method and safety regulations of the machine.
 

2. The machine is not allowed to be used without company training.
 

3. Before using the automatic quantitative powder packaging machine, read the instruction manual of the machine carefully, and understand all the contents and instructions.
 

4. After the machine is installed and debugged, the test machine can be put into production operation.
 

5. Before starting, make sure not to place any tools or utensils on all the countertops of the machine.
 

6. Before turning off the power, do not touch the inside of the machine or electrical facilities.
 

7. The operator is not allowed to leave the working range of the machine when the machine is running. It is strictly forbidden to touch the hot sealing wheel, sealing mold and moving parts when the machine is running.
 

8. Professionals or technicians trained by the company are required to inspect and maintain electrical control circuits.
 

9. Use the machine under ambient conditions.
 

10. Without the permission of the company, do not modify the machine arbitrarily, or install any other company's equipment on the machine to avoid danger.

The above is today's sharing of the situation about understanding the automatic quantitative powder packaging machine, and then starting the work. I hope it will be helpful for everyone to use this equipment in the future.