company news about The maintenance skills of these automatic hard capsule filling machine manufacturers will be lost if you don't look at them

Fully automatic hard capsule filling machine manufacturers have fast filling speed and small size difference. This machine integrates powder capsule shell finishing, capsule cap finishing, and capsule set into one, compact and convenient, such as 2-3 sets at the same time. Suitable for mass production.

It has the functions of arranging and locking capsules, reducing the body and floor area, and has the advantages of being beautiful and compact, meeting hygienic requirements, simple operation, convenient maintenance, low power consumption, economical and practical, etc.;

The quantity is uniform and the product qualification rate is high; when it is necessary to replace different types of capsules, just replace the corresponding type of capsule filling board; it is suitable for small and medium batch production in small and medium-sized pharmaceutical factories, health care products factories, hospitals and clinics.

Maintenance skills of automatic hard capsule filling machine manufacturers:

1. Before going to work every day, observe the moisture filter and lubricator of the pneumatic combination of the filling machine.

If there is too much water, it should be removed in time, and if the oil level is not enough, it should be refueled in time;

2. Always observe the mechanical parts of the machine during production to see whether the rotation and lifting are normal, whether there is any abnormality, and whether the screws are loose;

3. Always check the ground wire of the filling machine, and the contact requirements are reliable; frequently clean the weighing platform; check whether the pneumatic pipeline is leaking and whether the trachea is broken.

4. Change the lubricating oil (grease) of the reducer motor every year, check the tightness of the chain, and adjust the tension in time.

5. If it is not used for a long time, the material in the pipeline should be emptied.

6. Do a good job of cleaning and sanitation of the filling machine, keep the surface of the machine clean, often remove the accumulated material on the scale body, and pay attention to keeping the electric control cabinet clean.

7. The sensor of the automatic hard capsule filling machine manufacturer is a high-precision, high-sealing, high-sensitivity device. It is strictly forbidden to impact and overload. It must not be touched during the working process, and it is not allowed to disassemble it unless it is required for maintenance.