Automatic eye drops filling machine is a machine for filling liquid. The use of mechanized filling can not only improve labor productivity, reduce product loss, ensure packaging quality, but also reduce mutual pollution between the production environment and the loaded materials.
Therefore, modern production industries generally use fully automatic filling machines. It is very important to choose a liquid filling machine reasonably. In general, the actual production should be closely considered, and the filling machine with good quality, high efficiency, small size, simple structure, convenient use and maintenance, and light weight should be selected as far as possible. So what are the precautions for the installation and use of the automatic eye drops filling machine?
1. When dismantling and washing the machine, do not wash it directly with water. If you use water pipes, water guns and other instruments to rinse the machine, if the water source enters the inside of the machine, it is likely to cause the machine to age faster, weaken its performance, and easily crash. If it is necessary to clean the filling machine, the remaining products in the machine should be cleaned up, and then the material barrel should be filled with gentle cleaning liquid. Warm water is recommended, but soapy water, alcohol and other cleaning fluids can also be used if necessary.
2. If the injection nozzle overflows, press the safety emergency stop switch to ensure the neatness of the workshop. If the staff finds that the material is overflowing from the injection nozzle, they should press the safety emergency stop switch in time to avoid wasting material. After the machine stops, take out the injection nozzle to check if there is any damage. Replace the injection nozzle if damaged.
3. When the cylinder cannot be pushed back due to improper operation, do not press the safety button recklessly. When the cylinder of the machine cannot be returned, the production should be suspended for 1-2 minutes to check whether the machine fails or crashes. If the machine fails during production, the staff presses the emergency stop switch. It may cause confusion inside the machine and clear all previous settings. Production efficiency will be delayed.
The automatic eye drops filling machine is only suitable for filling low-concentration items such as liquids, and cannot be used for other purposes. To ensure safe production, please pay attention to the following:
1. Use the power supply and gas source that meet the requirements of the automatic eye drops filling machine.
2. Before disassembling and washing the automatic eye drops filling machine, please be sure to turn off the gas source and power supply.
3. The second half of the automatic eye drops filling machine (near the control button) is equipped with electrical control components. No matter what the circumstances, do not directly wash the body with water, otherwise there will be a danger of electric shock and damage to the electrical control components.
4. In order to prevent electric shock, the machine must be well grounded, please equip the automatic eye drops filling machine with a power socket with a ground wire.
5. After turning off the power switch, some circuits in the electrical control of the automatic eye drops filling machine still have voltage, so be sure to unplug the power cord when overhauling the control circuit.
Equipment maintenance of automatic eye drops filling machine:
1. The body of the filling machine is made of stainless steel. Do not scrape its surface with sharp and hard tools.
2. When removing and washing the piston, remove the fixing screws at the same time, so as not to affect the process requirements of the other when removing the first one.
3. The cylinder has been lubricated at the factory, please do not open or add any lubricating oil.
Contact Person: Ms. Wei