Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
We will call you back soon!
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
—— Fatih BÜYÜKEGEN
—— Hamid Doroudian
1. Regularly check the tightness of all bolt connections, and timely tighten them in case of looseness.
2. After the machine works every day, first disconnect the power supply and wipe the machine surface, workbench and other parts.
3. The equipment can be normally put into production only when the supporting power supply voltage is used.
4. Check whether the label is scratched during its travel, and if so, adjust the mechanism.
5. Check whether the backing paper is damaged. The label supplier is required to control the die-cutting depth. The backing paper shall not be cut, and the Grating backing paper shall be used.
6. Keep an eye on the working state of the plane labeling machine. During the process of the plane labeling machine, the staff shall regularly check the relevant electrical components to ensure smooth operation of the mechanism, smooth connection between the powder hopper and the mixer, and smooth feeding.
7. When checking the labeling, do not stick to the labeled products. If necessary, control the length of labeling.