Home News

company news about Maintenance and Repair of 3D mixer Power System

Certification
China Hangzhou SED Pharmaceutical Machinery Co.,Ltd. certification
China Hangzhou SED Pharmaceutical Machinery Co.,Ltd. certification
Customer Reviews
 I would like to thank you for all your efforts to choose the correct atomizer for our spray dryer,High speed drying. The surface area of Raw Material liquid increased a lot after atomization through nebulizer, 95%-98% of moisture will be evaporated in high temperature airflow in a flash, only needs seconds time.

—— Fatih BÜYÜKEGEN

I really don't know how to thank you, you are my angel, Thank you very much. Super Fine Pulverizing this one is faster than other same power machine and is easy to operate and repaired.

——  Hamid Doroudian 

I'm Online Chat Now
Company News
Maintenance and Repair of 3D mixer Power System
Latest company news about Maintenance and Repair of 3D mixer Power System
Maintenance and Repair of 3D Hybrid Power System
1, three-dimensional mixer reducer, such as regular use, to be replaced every three months a new oil, the replacement should be cleaned with a new oil reducer.
2, three-dimensional mixer reducer bearing cap end of the axis of activity with blades, the shaft is equipped with oil cup lubrication, the use of each working class with a butter gun plus butter 1-2 times.
3, mechanical inspection 1-2 times a month on a regular basis, check the parts for the worm, worm, bearings, oil seals, the rotation is flexible part of the operation, fasteners are loose and found that anomalies should be promptly addressed.
 
4, during use, if it is found that three-dimensional mixer vibration abnormal or abnormal sound, should immediately stop checking.
5, electrical control parts should be clean and sensitive, found that the fault should be promptly repaired.
6, mixing pulp should be light demolition demolition demolition, stable, light, so as not to damage deformation.
7, after the use of three-dimensional mixer, should brush all parts of the machine residual material, deactivate a long time, the machine must be wiped clean all the parts surface coated with anti-rust oil, with a tarpaulin cover.
8, Lubrication: For the first time, it is necessary to clean the oil regularly to prevent the dirt from entering the gear box, affecting the service life of the whole machine. Mixed groove wall bearing back-end plus grease.
Pub Time : 2021-08-30 17:30:28 >> News list
Contact Details
Hangzhou SED Pharmaceutical Machinery Co.,Ltd.

Contact Person: Ms. Wei

Tel: 86-15372434551

Fax: 86-571-88615836

Send your inquiry directly to us (0 / 3000)