The tablet polishing machine can polish capsules and tablets, and can remove empty shells and broken capsules at the same time. Equipped with an all-stainless steel vacuum cleaner, no other vacuum equipment is required. Compared with ordinary polishing machines, it can save 50% of electric energy. All parts of tablet polishing equipment in contact with drugs are made of stainless steel and comply with GMP standards.
The negative pressure type waste removal device is adopted, which has no pollution to the environment. The tablet polishing equipment enables the capsule and tablet polishing equipment to remove the dust on the surface of the capsule and the tablet, improve the surface finish, and is suitable for the production of various capsules and tablets.
Instructions
1. Connect one of the suction pipes of the industrial vacuum cleaner under the polishing sealing cylinder; connect another suction pipe of the industrial vacuum cleaner above the waste remover.
2. Turn on the power of the industrial vacuum cleaner and the polishing machine, and adjust the speed of the polishing machine. Use a small amount of capsules with waste shells to test the machine, and adjust the negative pressure air intake of the waste remover, so that it is appropriate to just remove the empty shell fragments. If the negative pressure inlet air is too large, it is possible to suck out the good capsules, and if it is too small, it will not be able to remove waste.
The air volume for waste removal is adjusted on the adjustment plate at the inlet of the industrial vacuum cleaner, and the waste removal situation can be observed from the observation board in front of the waste removal device. The air volume of the suction pipe that absorbs the powder is also adjusted by the adjustment plate of the industrial vacuum cleaner.
3. After the above preparations are done, the work can be carried out.
4. Clean up polishing machines and industrial vacuum cleaners in time after each shift is completed. If necessary, the industrial vacuum cleaner should also be cleaned in the middle of the work.
Adjustment method
(1) Adjustment of polishing machine speed: arranged by electronic governor. For fragile capsules, the rotational speed can be appropriately low, and vice versa. When used for tablet polishing, the rotation speed can be appropriately adjusted.
(2) Inclination adjustment of the polishing cylinder: the inclination is adjusted by the tail support plate, the large inclination has a good polishing effect, and the small inclination has a high production efficiency.
(3) Adjustment of industrial vacuum cleaners: Professional industrial vacuum cleaners have two sets of dust washing pipe devices, each with a suction air volume adjustment plate, and the air volume is adjusted according to the usage.
troubleshooting
1. Connect one of the straws of the industrial vacuum cleaner under the polishing sealing cylinder;
2. Turn on the power supply of the industrial vacuum cleaner and polishing machine, and adjust the air volume of the straw for absorbing the powder, and also adjust the adjusting plate of the industrial vacuum cleaner.
3. After the above preparations are done, the work can be carried out.
4. Clean up polishing machines and industrial vacuum cleaners in time after each shift is completed. If necessary, the industrial vacuum cleaner should also be handled in the middle of the work.
5. Adjustment method: polishing cylinder inclination adjustment: the inclination is adjusted by the tail support plate, the inclination is large, the polishing effect is good, and the inclination is small, the production efficiency is high.
Contact Person: Ms. Wei
Tel: 86-15372434551
Fax: 86-571-88615836
