The fully automatic capsule filling machine model is based on the ordinary model, which adds touch screen control, PLC programmable controller, intelligent module and optical fiber detection, etc. As a commonly used machine by pharmaceutical manufacturers, it is inevitable that the machine will fail after long-term work.
Generally speaking, the capsule filling machine is a kind of automatic hard capsule filling equipment with intermittent operation and orifice metering. It has precise design and stable operation.
Export and other processes, in order to use the automatic capsule filling machine model normally and smoothly, we must do the equipment adjustment before using it. Then what should be done before the operation.
1. Turn on the power.
2. Check that all safety settings are properly equipped and adjusted.
3. Without capsules and powder, use the hand wheel to rotate 1-3 in the direction of machine running. After it is normal, put the capsule and the powder into the capsule bucket respectively, and the height of the powder into the powder bucket should be 60mm lower than the height of the container.
At the same time, there should be more than half of the powder in the metering and dispensing room.
4. Adjust the preset depth of the filling rod inserted into the metering plate.
5. After everything is adjusted, press the main unit to jog. After the jog is normal, the switch can be started for automatic operation.
6. Speed adjustment is carried out when the main motor is running.
Tips In order to use the automatic capsule filling machine model with higher efficiency, longer life and safer, please do these tasks well.
Contact Person: Ms. Wei
Tel: 86-15372434551
Fax: 86-571-88615836