The performance of the automatic capsule filling machine has reached the world level. Its features are: small size, low energy consumption, simple replacement of the mold, easy operation and easy cleaning; Standardization and serialization of automatic capsule filling machine: the manufacturing parts can be interchangeable, and the replacement of the mold is convenient and accurate.
The automatic capsule filling machine adopts a high-precision indexer, with small vibration, the working noise of limit movement is less than 70dB, the dose difference is controlled within ± 3%, and the capsule loading rate of domestic machine is higher than 99.5%; The platform of the automatic capsule filling machine adopts 45 ≠ hard chrome plating on the surface of the flat plate, which is not easy to deform, prevent rust and improve hardness;
The parts in direct contact with the powder are 304 and 316 stainless steel, * meeting the GMP requirements of the pharmaceutical factory. The fully automatic capsule filling machine can be equipped with a powder collector according to the needs of users, which can effectively and directly recover 85% - 90% of the lost materials, and improve the economic benefits of drug manufacturers.
The fully automatic capsule filling machine has complete functions, the hopper has no material beep alarm, and the machine stops automatically when the empty capsule is not enough.
The filling function of pellets, granules and tablets can be installed according to the user's requirements to meet the requirements of three kinds of materials, and to meet the requirements of slow release, controlled release and tablet drugs in the same capsule. The sealing device is embedded at the bottom of the metering plate of the automatic capsule filling machine to improve the powder leakage, reduce the wear of the machine parts, and make it easier to clean.
A baffle is set around the dosing plate, which can effectively recycle the powder thrown from the lower surface of the dosing plate through the pipeline, and reduce the dust on the working table.
Contact Person: Ms. Wei