Home News

company news about Factors affecting the work of automatic capsule filling machine

Certification
China Hangzhou SED Pharmaceutical Machinery Co.,Ltd. certification
China Hangzhou SED Pharmaceutical Machinery Co.,Ltd. certification
Customer Reviews
 I would like to thank you for all your efforts to choose the correct atomizer for our spray dryer,High speed drying. The surface area of Raw Material liquid increased a lot after atomization through nebulizer, 95%-98% of moisture will be evaporated in high temperature airflow in a flash, only needs seconds time.

—— Fatih BÜYÜKEGEN

I really don't know how to thank you, you are my angel, Thank you very much. Super Fine Pulverizing this one is faster than other same power machine and is easy to operate and repaired.

——  Hamid Doroudian 

I'm Online Chat Now
Company News
Factors affecting the work of automatic capsule filling machine
Latest company news about Factors affecting the work of automatic capsule filling machine

Factors affecting the work of automatic capsule filling machine


1. Environment


The environment of the filling room is mainly temperature and humidity. Relatively ideal conditions are that the humidity is 35~65% and the temperature is 15~25℃.

 

If the humidity or temperature is too low, the capsules will become brittle and easily cracked; if the humidity is too high, the capsules will become sticky. , deformation, and excessive temperature will cause thermal damage to the capsule.


2. Transportation
During transportation, if the hollow capsule is impacted, resulting in deformation of the capsule, the capsule filling machine will be blocked during production, affecting production efficiency and product quality.


In order to ensure the quality of capsule products, we must first ensure that the production environment meets the requirements and the capsules are transported reasonably.


Now, with the continuous improvement of filling technology, the degree of automation of capsule filling machines is getting higher and higher, and the filling speed is getting faster and faster, from tens of thousands to hundreds of thousands or even hundreds of thousands per hour.

 

Therefore, the confirmation and debugging of the equipment must be done well before production. After the equipment is abnormal, the problem should be found in time and accurately, and the correct adjustment should be made to ensure that the equipment runs in a safe state, so as to improve production efficiency and ensure product quality.

 

 Otherwise, once there is a problem with the equipment, a large number of defective products may be produced in a very short period of time, resulting in unnecessary waste and a decrease in the product qualification rate.

 

latest company news about Factors affecting the work of automatic capsule filling machine  0

Pub Time : 2022-08-18 17:23:56 >> News list
Contact Details
Hangzhou SED Pharmaceutical Machinery Co.,Ltd.

Contact Person: Ms. Wei

Tel: 86-15372434551

Fax: 86-571-88615836

Send your inquiry directly to us (0 / 3000)