company news about Don't panic when the liquid filling machine encounters a fault. Come here quickly to find a solution

When we use the liquid filling machine, we certainly do not want to have failures in the operation, but any equipment can not avoid such problems in the use, especially the aging filling machine equipment. If small problems are solved in time, they will be improved. If the delay causes major problems, it will cause longer maintenance time for the equipment, thus affecting the production cycle and reducing production efficiency, The gains outweigh the losses. Next, we will explain common faults for you, so that you can use the filling machine more smoothly.

1、 What is the reason why the liquid filling machine does not fill accurately and does not discharge, and how to solve it:

1. If the filling machine fails to fill accurately or produce materials, the first thing is to check whether the filling nozzle is blocked by foreign matters. This is very simple. Clean it up. If the filling nozzle is damaged, replace it with a new one in time.

2. Check whether there is air in the conveying pipe of the filling machine, and if there is any, remove the air.

3. Check all sealing rings and replace them in time for aging or damage.

4. Adjust the filling speed. The filling speed will affect the filling accuracy

5. The material of the filling machine is insufficient, just add new material.

2、 How to solve the PLC failure of automatic filling machine:

For the common faults of the filling machine PLC, such as invalid cylinder reset, the solenoid valve coil cannot be powered off, the PLC sends a stop signal to the motor without stopping, and the filling machine motor must be powered off before it can stop running. If such problems occur, professional development engineers are required to deal with them, and modifying the program is also a convenient and quick way for Z to deal with them.