Tablet pressing machine belongs to one kind of health product processing equipment, which is suitable for tablet forming of health product.Industry said that in the production process of tablet health care products, the tablet machine mold plays a vital role in the quality of products.
For example, the hole of punching die becomes larger, resulting in uneven packing of punching hole, resulting in the difference in weight of the product piece or producing the slipper;The different length of impact directly affects the weight and hardness of the product, resulting in the fragmentation, or the degree of fragility.The punch head has the edge to knock the edge to roll or the punch head is not level, the influence one-sided causes the sliver, the stick punches and so on.Therefore, the mold before the use of the need to pay attention to inspection and necessary maintenance or replacement, to ensure the stability of product quality and continuous tablet production, reduce the cost of enterprises.
In addition, the tablet machine mold in the installation, use, it is necessary to check, maintenance, to ensure that the next enterprise use of equipment in good condition.Therefore, in the daily management, the operator must pay attention to the daily maintenance of the die press, maintenance and storage, to ensure the quality of the product.In this regard, a tablet machine equipment manufacturers share the tablet machine mold daily maintenance and maintenance skills, mainly divided into five points, only for industry reference.
First of all, if the health product production enterprise newly purchased the tablet pressing machine mold, it is necessary to let the tablet pressing machine mold be accepted by the workshop mechanic and accepted. After passing the inspection, the tablet pressing team leader will confirm again.Only when the equipment runs stably can it be put into production and use.
Secondly, it should be noted in the storage of the equipment that the workshop mechanic should remove the outer package after receiving it and clean and disinfect it with 95% ethanol after removing the anti-rust oil. Only then can the equipment be stored in the mold room for later use. The equipment should be placed in the area according to the machine type and tablet type, with obvious labels.
Third, before using the tablet press mold, should check the use of health products tablet press mold specifications and models are consistent with the required specifications and models.
Before the mold is installed, clean cloth should be applied to wipe it, and 75% ethanol should be used to wipe it. After the ethanol is evaporated, it can be installed and used again.Industry remind, during the process of installation should pay attention to check whether the punch and die are consistent, pay attention to handle and put lightly, at the same time, pay attention to the old and new die do not mix, have to mix should evaluate or test the control and impact on the weight difference of the piece.
Fourthly, the mould of health product tablet pressing machine should be returned to the mould management room after use and cleaned in time. 95% ethanol should be used in the cleaning process. Attention should be paid to check whether the mould is damaged.
Fifthly, if the cleaned mold is not used for a long time, it should be coated with a layer of anti-rust oil. When storing, it should be placed according to the model and the plate type, and it should be marked clearly.
Industry recommendations, storage process should ensure the room temperature and humidity, in order to avoid health product press mold rust, such as room humidity is too high can be opened dehumidifier to keep dry, keep the clean dry mold room, mold room shall not store in addition to the mold of any items.
Contact Person: Ms. Wei
Tel: 86-15372434551
Fax: 86-571-88615836