company news about Adjustment method and routine maintenance method of capsule tablet polishing machine

The capsule tablet polishing machine has the characteristics of novel mechanism, beautiful shape, light weight, simple operation, flexible movement, convenient cleaning, high polishing efficiency, good cleanliness, etc. All parts in contact with drugs are made of stainless steel, and the sanitary conditions of the equipment comply with GMP standards.

The following is a brief introduction to the adjustment and maintenance methods of the capsule tablet polishing machine, as shown below:

1. Inclination adjustment of polishing cylinder: the inclination is adjusted by the rear support plate. The large inclination has good polishing effect, and the small inclination has high production efficiency.

2. Adjustment of industrial vacuum cleaner: professional industrial vacuum cleaner has two sets of dust washing pipe devices, each of which is adjusted by the air suction adjusting plate, and the air volume is adjusted according to the use situation.

3. Speed regulation of polishing machine: arranged by electronic governor. For fragile capsules, the rotation speed can be appropriately low, and vice versa. When used for tablet polishing, the rotating speed can be appropriately lowered.

4. Adjustment method: polishing cylinder tilt adjustment: the tilt is adjusted by the rear support plate, the large tilt has good polishing effect, and the small tilt has high production efficiency.

5. Connect one of the suction pipes of the industrial vacuum cleaner under the polishing sealing cylinder;

6. Connect the power supply of the industrial vacuum cleaner and polishing machine, and the air volume of the suction pipe for absorbing the powder is also adjusted at the regulating plate of the industrial vacuum cleaner.

7. The work can only be carried out after the above preparations are completed.

8. Clean the polishing machine and industrial vacuum cleaner in time after the completion of each shift. If necessary, the industrial vacuum cleaner should also be cleaned during the work.