company news about Adjustment method and daily maintenance method of capsule tablet polishing machine

Capsule tablet polishing machine has the characteristics of novel mechanism, beautiful appearance, light weight, simple operation, flexible movement, easy cleaning, high polishing efficiency and good cleanliness. All parts in contact with medicines are made of stainless steel, and the hygienic conditions of the equipment conform to GMP standards.
 

The following editor briefly introduces the adjustment method and maintenance method of the capsule and tablet polishing machine, as follows:

1. Adjusting the inclination of the polishing cylinder: the inclination is adjusted by the tail support plate, the larger the inclination, the better the polishing effect, and the smaller the inclination, the higher the production efficiency.

2. Adjustment of industrial vacuum cleaners: Professional industrial vacuum cleaners have two sets of dust washing pipe devices, each with a suction air volume adjustment plate, and the air volume is adjusted according to the usage.

3. Adjustment of polishing machine speed: arranged by electronic governor. For fragile capsules, the rotational speed can be appropriately low, and vice versa. When used for tablet polishing, the rotation speed can be appropriately adjusted.

4. Adjustment method: polishing cylinder inclination adjustment: the inclination is adjusted by the tail support plate, the larger the inclination, the better the polishing effect, and the smaller the inclination, the higher the production efficiency.

5. Connect one of the straws of the industrial vacuum cleaner under the polishing sealing cylinder;

6. Turn on the power supply of the industrial vacuum cleaner and polishing machine, and adjust the air volume of the straw for absorbing the powder, and also adjust the adjusting plate of the industrial vacuum cleaner.

7. After the above preparations are done, the work can be carried out.

8. Clean up polishing machines and industrial vacuum cleaners in time after each shift is completed. If necessary, the industrial vacuum cleaner should also be handled in the middle of the work.