100 Holes Automatic Rotary Size 0 Capsule Filling Machine 1200BMP Capacity
Detailed Parameters of Capsule Filling Machine
|size of capsule||capsule size #00-#5 and safety capsule A-E|
Trait of Capsule Filling Machine
1. njp 1200 capsule filling machineSmall size, low energy consumption, easy to replace touch, easy to operate and clean;
2. Fully automatic capsule filling machine standardization, serialization: manufacturing parts can be commonly used, convenient and accurate replacement tools.
3. Fully automatic capsule filling machine adopts high precision divider, with low vibration, working noise of extreme sports less than 70dB, dosage difference controlled within ±3%, and the probability of capsule loading of domestic machine is higher than 99.5%.
4. Mechanical and gas components of full-automatic capsule filling adopt well-known brands such as Siemens ag of Germany and omron of Japan, and the control system is safe and reliable.
⒌ automatic capsule filling machine platform USES 45 indicates flat steel surface hard chromium plating, not changeful form, prevent rust, improve the hardness.The parts in direct contact with the powder are made of 304 and 316 high quality stainless steel, which fully meets the GMP requirements of the pharmaceutical factory.
Product Description of Capsule Filling Machine
Automatic capsule filling machine integrating machine, electricity, gas, microcomputer PLC, touch panel operation, frequency control, equipped with electronic automatic counting device
The machine movement sensitive, filling dose accurately, novel structure, beautiful shape, easy operation, can automatically complete capsule in place, separating, filling, locking, reduce labor intensity, improve the efficiency of production, conform to the requirements of the pharmaceutical and health.
Suitable for filling all kinds of domestic or imported capsules.It is an economical and practical equipment for filling capsule drugs in pharmaceutical industry.
Working Principle of Capsule Filling Machine
The working principle of the automatic capsule filling machine is divided into two parts, which are the movement of the capsule and the filling of the medicine:
1. Movement of the capsule
During the filling process of the intermittent capsule filling machine, the movement of the capsule depends on the indexing box for intermittent and discontinuous rotation. The filling volume of the capsule is mainly determined by the volume of the metering
disc hole. The hollow capsule is in the capsule hopper, the main board moves up and down, the capsule enters the capsule guide groove by its own gravity, and then the horizontal fork and the vertical plug make the capsule cap upward and the
capsule body downward into the upper and lower modules. The capsule body and capsule cap are separated under the action of the device, and then the module enters the powder filling station.
2. Drug filling
The sensor in the powder holding ring controls the screw feeding rod above it, and the medicine is continuously added to make the height of the powder in the powder holding ring constant. position, push the drug column into the capsule body. After that, it
enters into the capsule rejection, capsule locking, finished capsule discharge, module cleaning station in turn, and then enters a new round of station cycle, and the cycle begins again and again.
Product Show of Capsule Filling Machine
Application of Capsule Filling Machine