The semi-automatic capsule filling machine is further improved on the basis of the original capsule filling machine at home and abroad. It has high technical content, high performance, and its functions reach the level of *. It is the ideal equipment for the production of capsule drugs in the pharmaceutical industry at present. The performance and characteristics of semi-automatic capsule filling machine are as follows:
1. The whole machine has beautiful appearance, fine process, simple operation and convenient use.
2. The design integrates the filling seat and the metering disc, so that the metering disc and the filling rod will not be offset, avoiding friction between the filling rod and the metering disc, improving the accuracy of loading and prolonging the service life.
3. It can automatically remove defective capsules, recover drugs in defective capsules, reuse them, and increase economic benefits.
4. This machine is easy to disassemble and clean, and can exchange various types of molds. It can be used on the same machine to meet the requirements of different production capacities.
The function of the semi-automatic capsule filling machine is to automatically load the medicine into the empty capsules in the capsule mold in order. The hopper is equipped with a stepless speed regulating motor (the instrument displays the speed) to drive the propeller to force the medicine into the empty capsules.
The lower rotary table drives the mold to rotate. The lower rotary table also drives the mold to run with the stepless speed regulating motor, making the mold run under the feeding nozzle for a week. The mold is controlled by photoelectric counting (the counter is set 30 times). When the filling (ON) is pressed to start, the hopper is pushed to the mold by the air cylinder.
After the hopper is in place, the rotary table motor and the hopper motor start automatically. When the die rotates for one circle, it automatically stops, and the cylinder automatically returns to its original position.
If the speed of the hopper is too fast or too slow, adjust the two one-way throttle valves at the interface of the solenoid valve to make the speed appropriate. In addition, if the motor starts before the hopper is in place, or fails to start after it is in place, the time relay on the computer control board can be adjusted to start within 1 second after it is in place.
The speed of the hopper motor and the speed of the rotary table motor can be adjusted depending on the amount of filling and the good or bad fluidity of the medicine. If the medicine is difficult to be filled, the counter setting value can be adjusted to 60 or 90, and the factory setting is 30.
Contact Person: Ms. Wei