company news about Principle, application and scope of multiple-impact rotary tablet press

Multi-impact rotary tablet press is used to press various granular raw materials into round sheets, and can also press various geometric shaped sheets. It is suitable for mass production of large diameter calcium tablets, milk tablets, candy, chemical and metallurgical electronic components. The speed of the rotary table, the filling depth of the material and the thickness of the tablet can be adjusted. The mechanical buffer device on the machine can avoid the damage caused by overload.

One side of the machine body is equipped with a powder suction box. Through the suction nozzle, the dust generated during the operation of the machine can be absorbed to avoid binding and blocking, and the raw materials can be recycled for reuse.

The principle of multi-impact rotary tablet press:
The machine is driven by the motor, and the turntable rotates. When the turntable drives 20 pairs of dies to rotate, the turntable with gears also makes the cored disc rotate. The up-down punch moves up and down with the curve guide rail to complete the filling and pressing action, while the cored device moves to complete the cored, where the outer layer is initially filled, cored, and refilled to complete the pressing of the chip package. The upper pressing wheel can adjust the depth of the upper punching die by moving up and down, so as to control the thickness of the pressing process; The up and down track is equivalent to a cylindrical cam, which determines the track of up and down movement on the circumference.

Description of application and scope of application of multi-impact rotary tablet press:

1. This machine is a miniaturized machine based on the automatic rotation and continuous tablet press used in production. It is mainly used in the process research of pharmaceutical, chemical, food, electronics and other industrial departments to confirm whether the granular raw materials can be pressed into tablets.

2. This machine is suitable for pressing granular raw materials which can be pressed into tablets (within the pressure range of this machine) and whose powder content (more than 100 mesh) does not exceed 10%.

3. This machine is suitable for pressing 4~12mm round, irregular and lettering tablets.

4. This machine is not suitable for pressing semi-solid, moist particles, low melting point and hygroscopic raw materials and non-powder tablets.