|
Product Details:
|
| Name: | Capsule Filling And Sealing Machine For Size 00-4 | Capacity: | 200 Capsules/min |
|---|---|---|---|
| Filling Material: | Powder, Granules | Total Power: | 3.75KW |
| Size: | 800mm (L) X 970mm(W) X 1870mm(H) | Weight: | 600KG |
| High Light: | plexiglass capsule filling and sealing machine,20 cans/min capsule filling and sealing machine,200mm Capsule Filling And Sealing Machine |
||
Capsule Filling And Sealing Machine for Size 00-4
Working Principle of Capsule Filling Machine
The working principle of the automatic capsule filling machine is divided into two parts, which are the movement of the capsule and the filling of the medicine:
1. Movement of the capsule
During the filling process of the intermittent capsule filling machine, the movement of the capsule depends on the indexing box for intermittent and discontinuous rotation. The filling volume of the capsule is mainly determined by the volume of the metering
disc hole. The hollow capsule is in the capsule hopper, the main board moves up and down, the capsule enters the capsule guide groove by its own gravity, and then the horizontal fork and the vertical plug make the capsule cap upward and the
capsule body downward into the upper and lower modules. The capsule body and capsule cap are separated under the action of the device, and then the module enters the powder filling station.
2. Drug filling
The sensor in the powder holding ring controls the screw feeding rod above it, and the medicine is continuously added to make the height of the powder in the powder holding ring constant. position, push the drug column into the capsule body. After that, it
enters into the capsule rejection, capsule locking, finished capsule discharge, module cleaning station in turn, and then enters a new round of station cycle, and the cycle begins again and again.
Detailed Parameters of Capsule Filling Machine
| Model | SED-200J-H |
| Capacity | 200 capsules/min |
| Filling Material | Powder, Granules |
| Die Hole Number | 2 |
| Power Supply | 380V 50Hz 3P |
| Total Power | 3.75KW |
| Application | 00#-4# capsule |
| Filling Variation | ±3% - ±4% |
| Noise | ≤78dB(A) |
| Qualified Rate | ≥99.5% |
| Overall Dimension | 800mm (L) x 970mm(W) x 1870mm(H) |
| Weight | 600kg |
Characteristic of Capsule Filling Machine
1.The equipment features small footprint, low energy consumption, easy operation and easy maintenance.
2.Mold replacement is convenient and accurate.
3.The design of underslung cam and pressure atomizing oil pump keeps the lubrication in the cam groove, reduces wear and prolongs the service life of parts.
4.Using high-precision indexing drive, the vibration is small, and the working noise is lower than 78db. The vacuum positioning mechanism is used to make the capsule qualified rate reach more than 99.5%.
5.Based on the lower plane of the dosage plate, three-dimensional adjustment and uniform gap, the filling accuracy can be effectively ensured, and it is very convenient for cleaning.
Equipped with a touch screen, when there is a lack of material or capsules or a failure in the feeding channel, it will automatically alarm and stop automatically; real-time display of the metering of each capsule and the cumulative output.
Product Show of Capsule Filling Machine
Contact Person: Wei
Tel: 86-15372434551
Fax: 86-571-88615836
