Payment & Shipping Terms:
|Power Supply:||3 Phase 4 Wires AC 380V;50Hz||Maxi. Capacity:||260 Capsules/m|
|Capsule Specifications:||00#~5# And Safety Capsule A~E||Capsule Feeding Rate:||≥99.5%|
SED-260J Fully Automatic Capsule Filling Machine powder filling Medicament filling
The maximum production capacity of this machine can reach 260 capsules per minute. Standard and serial production: the interchangeability of manufacturing parts can reach above 99%; each spare part has its own regular code; while changing the mould, all the parts are fixed by the location hole with high precise; it’s very efficient to change the moulds, easy to operate and clean the machine.
1. This machine improves the internal design of mould rotary plate and adopts original Japan linear bearing, which can ensure its precision and service life.
2. It employs the cam underneath design and adds the pressure atomization oil pump, which can keep the cam groove lubricant, reduce wear and prolong the service life of accessories.
3. The upper and lower moulds of this machine carry out one-way movement. With employing the imported double-lip PU seal ring, it has very good sealing performance.
4. It adopts computer control, stepless frequency control of motor speed and digital display to make the operation more simple and intuitive.
5. It’s equipped with safety protection device for both operators and machine and auto-stop device for material lacking to make the machine run stably, safely and reliably, which is an ideal equipment for those pharmaceutical factories to produce hard capsules such as medicine or functional food.
6. This machine combines the mould blowing with sucking to ensure no dust in the mould hole and improve the rate of good finished capsules.
|Model||NJP-260 Fully automatic liquid capsule filler|
|Power supply||3phase 4 wires AC 380V;50Hz|
|Maxi. Capacity||260 capsules/m|
|Capsule specifications||00#~5# and Safety Capsule A~E|
|Capsule feeding rate||≥99.5%|
|Filling precision||Liquid Above 300mg≤±3%|
|Compressed air||0.06m3/min 0.3Mpa|
|Vacuum degree||-0.02~-0.06 MPa|
|Intake water diameter||20mm|
|Discharge water diameter||27mm|
|Work environmental temperature||21℃±3℃|
|Workshop’s height||Manual Feeding≥2.6m, Automatic Feeding≥2.8m|
|Material||Stainless steel 304 and 316.|