1) The material is fed automatically. The mould and feeder can be designed as user’s requirements.
2) Speed is shifted by step-less transducer. Adopt the interface of human-machine and PLC programmable controller, it can synchronize accurately.
3) Adopt the equipment of trace pressing, batch number printing and scarp-collecting.
4) Stepping motor drives and tow materials.
5) The heating moulds will automatically separate when the machine stops, which contributes to protect the material between them and extend the machine’s life.
Main Technical Data:
|1||Cutting Speed||10-40 cuttings/min|
(According to 4 cuttings per time,cutting speed 40 times/minute)
|3||Scope adjustable range||
(According to customer’s requirement)
Max size : 270×110mm
|5||Max forming area and depth||270mm×150mm×28mm|
PVC:Width 250mm,Thickness 0.15-0.5mm
Coating PTP(Aluminum Foil):Width 250mm,Thickness 0.02-0.35mm
Roll core diameter:70-76mm
|8||Main motor power||1.5KW|
|9||Power supply||380V 50HZ three phase five wires|
|10||Air consumption||≥0.2m3/min(Prepared by client) Pressure:0.4～0.6Mpa|
Tap water or circulation water
Water consumption : 60L/h
The machine is new product which is improved based on customer’s requirements. It’s suitable for packaging of all kinds of liquid and solid in large & medium pharmaceutical factory, health medicine factory, hospital preparation lab, food industry, electronic industry, hardware industry, etc.
It can protect the material from steam or dust, improve product packing degree, and increase the additional value. The machine is used to produce large quality and single product.