Pharmaceutical Ointment Manufacturing Machine Vacuum Emulsifying Mixer CE Approved
Main Technical Data:
|Working volume||130 L|
|Heating area for homogenizing tank||1.2㎡|
|Homogenizing motor||4 kw|
|Rotating speed||2800 r/min|
|Frame and scrapper motor||1.5 kw|
|Rotating speed||20-60 r/min|
|Working volume of the oil pot||60 L|
|Working volume of the water pot||80 L|
|Water circulation vacuum pump (KW)||1.45 kw|
|Power for the electricity heating||39 kw|
|Working pressure of the jacket||0.25 MPa|
|Working pressure of tank||≤0.09 MPa|
|Pressure of Compressed air||0.6-0.7 MPa|
|Air compression consumption||0.39 m3 /batch|
|Water consumption for jacket||2.0 m3 /batch|
|Water consumption for cleaning||1.1 m3 /batch|
The SED-100RZ Vacuum Emulsifying Mixer is composed of main pot(emulsifying pot),a water phase pot and an oil phase pot, vacuum unit, up-and down system, electrical control system and the motor frame etc.
The main pot is composed of the cut-off mixing pot, cut-off mixer unit, circulating system and the stirring system etc.
1) The pot cover is automatic rising type, the material was directed draw into the emulsifying boiler from oil boiler and water boiler based on a pipe that is under vacuum, the discharge is based on the turn the emulsifying boiler.
And the heating system is electric heating or steam heating that the temperature is automation control. Put the cool water into the intercalated bed so cooling the material, simple operation and safety( at the outside have a warm layer).
2) The homogenizer and the blade stirring can together work or separate work.. the material sliming,emulsification,mixing,dispersing,etc. what will finished during short time.
3) Contact position adopt high-quality stainless steel (medical use adopt 316L material make with supplies, the polishing of surface of the mirror of interior surface, mix the hygiene of the device in vacuum, it accords with the normal hygiene standard manufacture of GMP to adopt that is most ideal production equipment.)