Main Technical Data:
|Raw Material Input Volume||150-440L|
|Raw Material Input Capacity||75-220kgs/batch(material density 0.5g)|
|Operating time||Mixing:8min Granulation:15-20min/batch|
|Size of the finished granule||Φ0.14-Φ1.5mm(12mesh-100mesh)|
|Air compressor||0.5m³ 0.7Mpa (prepared by buyer)|
|Inlet of cooling water and compressed air||Φ10mm|
|Height of the output||1150mm|
The machine is a process machine widely applied for solid preparation production in the pharmaceutical industry. It has such functions as mixing, granulating, etc. It is widely used in such industries as medicine, food, chemical industry, etc.
The powder materials are fed into the mixing vessel through the dispensing system. Through rotation and push by the mixing paddle at the bottom, they first move under a fluidizing status and get sufficient mixing.
Then the adhesive is injected through the pressure spray gun to turn the dry powders into wet and soft materials. Meanwhile, they are made into even wet granules under the double actions of the mixing paddle and the high-speed cutter on the side wall.
1.It is the structure of horizontal cylinder (cone).
2.Full sealed driving shaft, to use water when cleaning.
3.Fluidization granulation, the finished granules are similar to roundness with good liquidity.
4.Compared with traditional process, it can reduce 25% binder and the dry time can be shortened.
5.Each batch of materials will be dry-mixed for 2 minutes and be granulated for 1-4 minutes. Compared with traditional process, it has improved by 4-5 times.
6.All the processes of dry-mixing & wet-mixing & granulating are finished in a closed vessel. So that it has reduced the process and also compiles with GMP standard.
7.Whole operation has the strict safety precautions.
Q1:Are You A Factory or A Trading Company
A: We Provided Perfect OEM and After-sale Service.
Q2:Where is Your Factory? How Can I Visit Your Factory?
A:Our Factory is Located on HangZhou Zhejiang Province. We Are Warmly Welcom You Visit Our Factory if You Have a Travel Plan
Q3:Can You Send Me the Video To Show The Machine Works?
A:Certainly, We Have Made Video of Every Machine
Q4:How Can I Know Your Machine Is Designed For My Product
A:You Can Send Us Samples of Your Product and We Test It On Machine
Q5:How Can I Pay My Order?
A:Usually We Accept L/C, D/A, D/P, T/T, , MoneyGram,Cash Paying Methods
Q6:Do you Have a Ce Certificate?
A:For Every Model of Machine, It Has a CE Certificated
Q7:What about install?
A. Our engineers will be sent according to your project.However,the customer will pay the economic air tickets round trip and arrange the accommodation for them.